Multipower

[Thag13]

OK Thag is the dumbest dumb that ever dumbed a dumb.

I just don't get how to make powers in a multi power.

could someone give me a couple of pointers here.

I have looked on both the boards and the manual.

Thanks

[nblade]

First put the power int the multipower. You will have to closed the power and then choose to edit it again. At this point there should be checkbox with an X in it next to Ultra. If you unselect it, and click ok, you should see that it has become a multi slot.

[Chris Goodwin]

Go to Power Frameworks. Select New Multipower. Begin adding your Powers; they'll automatically go into the Multipower. Once you're done with the Multipower, enter the next Power; it will show up inside the Multipower. Use the down arrow button at the bottom of the screen to move it out.

[Simon]

or select any power that is not inside the MP and use the up and down arrows to move it in....

...or select any power that is not inside the MP, cut it, and paste it into the MP....

[Thag13]

Thanks everyone.

I just couldnt get the hang of it.

Now it seems quite easy.

THAG

[nblade]

Thag13, sorry if I confused you. When I first read your post, I misunderstood what you were asking.